Low pressure regulator type EN61-DS

for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment

Article name

for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment

Open all Close all Advantages and equipment
  • overpressure safety valve S2SR to protect consumer equipment against inadmissible high pressures
  • visual indicator (green/red) with optical signal (red) in case of outlet pressures above 80 mbar
  • integrated excess flow valve EFV with manual opening, blocks the gas supply if the hose is damaged
  • particularly suitable for the use of commercially used consumer equipment with hose assemblies longer than 400 mm, such as barbecues, stoves and patio heaters
  • version with combined fitting for optional connection to 5, 11 or 33 kg gas cylinders
Conformity
  • EC type examination certificate PED
  • EC type examination certificate GAR
  • UKCA type examination certificate GAR
Technical data
  • maximum permissible pressure: PS 16 bar
Note
  • Pressure regulators with outlet pressure 29 or 37 mbar are not suitable for use in Germany!
Filter
Open all Close all
Niederdruckregler Typ EN61-DS
mit integrierter Schlauchbruchsicherung EFV (SBS)
mit Manometer
Connection A
Connection B
Outlet pressure
Flow rate
Type name
Inlet/Outlet
Control device
Packaging
Part no.
Connection A KLF
Connection B G 1/4 lh M
Outlet pressure 50 mbar
Capacity 1.5 kg/h
Typbezeichnung Typ EN61-DS
Ein-/Abgang gerade
Kontrolleinrichtung with gauge
Packaging standard packaging
Part no. 0115012
Low pressure regulator type EN61-DS
with integrated excess flow valve EFV
without pressure gauge
Connection A
Connection B
Outlet pressure
Flow rate
Type name
Inlet/Outlet
Packaging
Part no.
Connection A KLF
Connection B G 1/4 lh M
Outlet pressure 50 mbar
Capacity 1.5 kg/h
Typbezeichnung Typ EN61-DS
Ein-/Abgang gerade
Packaging shop packaging
Part no. 6115002
Connection A KLF
Connection B G 1/4 lh M
Outlet pressure 50 mbar
Capacity 1.5 kg/h
Typbezeichnung Typ EN61-DS
Ein-/Abgang gerade
Packaging standard packaging
Part no. 0115002
Connection A Komb.A
Connection B G 1/4 lh M
Outlet pressure 50 mbar
Capacity 1.5 kg/h
Typbezeichnung Typ EN61-DS
Ein-/Abgang gerade
Packaging standard packaging
Part no. 0115003
Connection A KLF
Connection B G 1/4 lh M
Outlet pressure 29 mbar
Capacity 1.5 kg/h
Typbezeichnung Typ EN61-DS
Ein-/Abgang gerade
Packaging standard packaging
Part no. 0115032
Connection A Komb.A
Connection B G 1/4 lh M
Outlet pressure 29 mbar
Capacity 1.5 kg/h
Typbezeichnung Typ EN61-DS
Ein-/Abgang gerade
Packaging standard packaging
Part no. 0115033

More products in the line of Pressure regulator low pressure