Cylinder system with manual changeover valve type MUV
for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment
consisting of: high pressure hose assemblies with small cylinder connection, manual changeover valve type MUV, low pressure regulator type EN61-DS with overpressure safety valve S2SR, visual indicator, pressure gauge, test point and support rail
Article name
for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment
consisting of: high pressure hose assemblies with small cylinder connection, manual changeover valve type MUV, low pressure regulator type EN61-DS with overpressure safety valve S2SR, visual indicator, pressure gauge, test point and support rail
Open all Close all Advantages and equipment Conformity Technical data Note
- the cylinder can be replaced without operational interruption
- pressure gauge for leak testing e.g. when the cylinder is replaced
- test point for leak testing the LPG system without disassembling the pressure regulating device
- by default, the version with compression fitting 10 / 8 at the outlet is fitted with an adapter to connect 8 mm piping
- single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate PED
- single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate GGV
- maximum permissible pressure: PS 16 bar
- When consumer equipment with a total connected load of up to 1.5 kg/h is connected, an excess flow valve does not need to be used.