Caramatic SafeDrive PLUS
NEW
Safety gas pressure automatic changeover system for the operation of two-cylinder systems in motor caravans and caravans while driving, for direct connection to the gas cylinder
consisting of: central and changeover regulator with mechanical crash sensor new with pendulum and pressure gauge, medium pressure hose assemblies and regulator bracket
Article name
Safety gas pressure automatic changeover system for the operation of two-cylinder systems in motor caravans and caravans while driving, for direct connection to the gas cylinder
consisting of: central and changeover regulator with mechanical crash sensor new with pendulum and pressure gauge, medium pressure hose assemblies and regulator bracket
Open all Close all Advantages and equipment Conformity Technical data Note
- gas supply while driving using the integrated mechanical crash sensor new with pendulum, which blocks the gas flow in case of an accident
- Advantages crash sensor new with pendulum:
- faster and easier start-up and reset after response
- more precise performance and therefore less interference from incorrect response behaviour
- start-up possible with no problem, even if the leisure vehicle is in an inclined position
- straightforward retrofitting, as no wall assembly of the regulators is required; the installation takes place directly on the gas cylinder
- low space requirement for the installation in the gas cylinder case
- gas cylinder can also stay open all the time while driving
- increased safety, as in the event of an accident, the gas supply is stopped directly at the gas cylinder
- automatic changeover to the gas cylinder on the reserve side as soon as the gas cylinder on the operating side is empty
- the cylinder can be replaced without operational interruption
- with pressure relief valve PRV
- gas non-return valve: prevents the escape of gas when the cylinder is replaced
- medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 lh nut x G 3/8 lh nut x 450 mm to connect the two regulators
- medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 lh nut x compr. fit. 10 x 450 mm
- suitable for connection of the remote display Caramatic BasicControl
- by default, the version with compression fitting 10 / 8 at the outlet is fitted with an adapter to connect 8 mm piping
- brackets for safe holding of the regulator on the wall, e.g. when replacing the gas cylinder
- single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate PED
- maximum permissible pressure: PS 16 bar
- connections: outlet: central regulator: G 1/4 lh M
changeover regulator: G 3/8 lh M - outlet pressure: central regulator: 30 or 50 mbar
changeover regulator: 150 mbar
- Caramatic SafeDrive PLUS cannot be used with adapter for the gas cylinder with clip-on connector.