Caramatic BasicTwo
automatic regulator changeover, for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment
consisting of: central (A) and changeover regulator (B), pressure gauge and hose assemblies
automatic regulator changeover, for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment
consisting of: central (A) and changeover regulator (B), pressure gauge and hose assemblies
- with pressure relief valve PRV
- corrosion resistant in accordance with EN 16129, annex M
- fitted with an adapter to connect 10 mm piping
- gas non-return valve: prevents the escape of gas when the cylinder is replaced
- medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 lh nut x G 3/8 lh nut x 400 mm to connect the two regulators, brass connections, stainless steel compressive sleeves
- medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 lh nut x compr. fit. 8 x 400 mm to connect the system to the piping, brass connections, stainless steel compressive sleeves
- suitable for connection of the remote display Caramatic BasicControl
- combined fitting for optional connection to 5, 11 or 33 kg gas cylinders
- including MiniTool to connect and disconnect regulators
- single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate PED
- maximum permissible pressure: PS 16 bar
- connections: inlet: Komb.W
outlet: central regulator: G 1/4 lh M
changeover regulator: G 3/8 lh M - outlet pressure: central regulator: 30 or 50 mbar
changeover regulator: 150 mbar