Two-cylinder system Caramatic BasicTwo

0201801_neutral_c1
freizeit_crb_caramatic_22

automatic regulator changeover, for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment

consisting of: central (A) and changeover regulator (B), pressure gauge and hose assemblies

Article name

automatic regulator changeover, for connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment

consisting of: central (A) and changeover regulator (B), pressure gauge and hose assemblies

Open all Close all Advantages and equipment
  • with pressure relief valve PRV
  • fitted with an adapter to connect 10 mm piping
  • gas non-return valve: prevents the escape of gas when the cylinder is replaced
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 lh nut x G 3/8 lh nut x 400 mm to connect the two regulators, brass connections, stainless steel compressive sleeves
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 lh nut x compr. fit. 8 x 400 mm to connect the system to the piping, brass connections, stainless steel compressive sleeves
  • fittings for 8 and 10 mm
  • combined fitting for optional connection to 5, 11 or 33 kg gas cylinders
  • including MiniTool to connect and disconnect regulators
Conformity
  • single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate PED
Technical data
  • maximum permissible pressure: PS 16 bar
  • connections: inlet: Komb.W
    outlet: central regulator: G 1/4 lh M
    changeover regulator: G 3/8 lh M
  • outlet pressure: central regulator: 30 or 50 mbar
    changeover regulator: 150 mbar
Product note
In the German DVGW worksheet G 607 for LPG systems in occupied leisure vehicles and for living purposes in other road vehicles, it is prescribed in the chapter for operation and testing that pressure regulators are to be replaced 10 years after the date of manufacture at the latest. If the working pressure of the system is 30 mbar, pursuant to G 607, a regulator according to EN 16129, annex D (e.g. part no. 01 280 10) is to be used in the event of a replacement. For LPG systems in vehicles with a working pressure of 50 mbar, a non-compliance permit applies. There is no obligation to convert to 30 mbar.
Filter
Open all Close all
Two-cylinder system Caramatic BasicTwo
Outlet pressure
Flow rate
Packaging
Part no.
Outlet pressure 50 mbar
Capacity 1.5 kg/h
Packaging shop packaging
Part no. 7121801
Outlet pressure 30 mbar
Capacity 1.5 kg/h
Packaging shop packaging
Part no. 7121802
Accessories Two-cylinder system Caramatic BasicTwo
Description
Packaging
Part no.
Description

medium pressure hose assembly rubber PS 10 bar, hose dimensions 6.3 x 3.5 mm, G 1/4 lh nut x compr. fit. 8 x 400 mm, brass parts

Packaging standard packaging
Part no. 0444001
Description

medium pressure hose assembly rubber PS 10 bar, hose dimensions 6.3 x 3.5 mm, G 3/8 lh nut x G 3/8 lh nut x 400 mm, brass parts

Packaging standard packaging
Part no. 0450401
Description

medium pressure hose assembly rubber PS 10 bar, hose dimensions 6.3 x 3.5 mm, G 3/8 lh nut x G 3/8 lh nut x 1500 mm, brass parts

Packaging standard packaging
Part no. 0450402
Description

medium pressure hose assembly rubber PS 10 bar, hose dimensions 6.3 x 3.5 mm, G 1/4 lh nut x compr. fit. 8 x 400 mm, brass parts

Packaging shop packaging
Part no. 6444002
Description

Caramatic BasicControl - Remote display for Caramatic BasicTwo two-cylinder system

Packaging shop packaging
Part no. 7139200

More products in the line of Pressure regulator for connection to gas cylinders