Tank withdrawal fitting type VTK-3

1642901_c1

for the withdrawal of fuels in a single and double conduit system, from underground and above-ground tanks

consisting of: quick-closing withdrawal valve with rotatable toggle valve, connection for withdrawal and return line, one or two NBR/PVC hose assemblies with tank spacer as spacer towards the tank bottom and tank connector G 1 M with HNBR sealing ring

operating media:
diesel, fuel oil and ...more

Article name

for the withdrawal of fuels in a single and double conduit system, from underground and above-ground tanks

consisting of: quick-closing withdrawal valve with rotatable toggle valve, connection for withdrawal and return line, one or two NBR/PVC hose assemblies with tank spacer as spacer towards the tank bottom and tank connector G 1 M with HNBR sealing ring

operating media:
diesel, fuel oil and fuel oil bio up to 20% (V/V) FAME

Open all Close all Advantages and equipment
  • including blind plug for the return line connection
Technical data
  • maximum admissible pressure: PS 10 bar
  • version with female thread G 3/8 suitable for cylindrical screw-in connectors type GERB according to EN ISO 1179-4 form B for sealing via the provided FKM O-rings or for connecting a universal connection set type UA
Product note
For modern oil firing installations in a single conduit system, smaller nominal widths (DN) for the suction line are recommended, such as the DN 5 versions listed below, for flow rates of up to 10 l/h. The thus achieved ideal flow rate prevents an outgassing of the fuel oil and thus undesired burner faults. The nominal length, e.g. 1,600 mm, is the distance between the lower edge of the tank connector G1 and the suction inlet in the tank spacer. For battery tanks with non-communicating withdrawal, according to German worksheet DWA-A 791, restrictions with respect to the floating withdrawal exist. It is not allowed if
  • a foot valve or backflow preventer is prescribed in the certificate of suitability for intended use according to the federal state building ordinance or
  • it is an underground tank.
Exception: A floating withdrawal is admissible if, in underground tanks, possibly inflowing water is detected, e.g. by means of a leak detection system.
Filter
Open all Close all
Tank withdrawal fitting
type VTK-3-R-SE, floating withdrawal
with backflow preventer, without measuring line
Connection A
Nominal width
Length
Type name
Type of withdrawal
Non-return valve
Measuring line
Packaging
Part no.
Connection A G 3/8 F
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-R-SE
Entnahmetyp schwimmende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1643061
Connection A UA 8/10
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-R-SE
Entnahmetyp schwimmende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1643071
Tank withdrawal fitting
type VTK-3-RM-SE, floating withdrawal
with backflow preventer, with measuring line
Connection A
Nominal width
Length
Type name
Type of withdrawal
Non-return valve
Measuring line
Packaging
Part no.
Connection A G 3/8 F
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-R-SE
Entnahmetyp schwimmende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung mit Messleitung
Packaging standard packaging
Part no. 1643060
Connection A UA 8/10
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-R-SE
Entnahmetyp schwimmende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung mit Messleitung
Packaging standard packaging
Part no. 1643070
Tank withdrawal fitting
type VTK-3-R, horizontal withdrawal
with backflow preventer, without measuring line
Connection A
Nominal width
Length
Type name
Type of withdrawal
Non-return valve
Measuring line
Packaging
Part no.
Connection A G 3/8 F
Nennweite DN 10
Länge 1600 mm
Typbezeichnung Typ VTK-3-R
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1642901
Connection A UA 8/10
Nennweite DN 10
Länge 1600 mm
Typbezeichnung Typ VTK-3-R
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1642916
Connection A G 3/8 F
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-R
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1643001
Connection A UA 8/10
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-R
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1643016
Connection A G 3/8 F
Nennweite DN 10
Länge 2600 mm
Typbezeichnung Typ VTK-3-R
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung ohne Messleitung
Packaging standard packaging
Part no. 1643401
Tank withdrawal fitting
type VTK-3-RM, horizontal withdrawal
with backflow preventer, with measuring line
Connection A
Nominal width
Length
Type name
Type of withdrawal
Non-return valve
Measuring line
Packaging
Part no.
Connection A G 3/8 F
Nennweite DN 10
Länge 1600 mm
Typbezeichnung Typ VTK-3-RM
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung mit Messleitung
Packaging standard packaging
Part no. 1642900
Connection A G 3/8 F
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-RM
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung mit Messleitung
Packaging standard packaging
Part no. 1643000
Connection A UA 8/10
Nennweite DN 10
Länge 2150 mm
Typbezeichnung Typ VTK-3-RM
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung mit Messleitung
Packaging standard packaging
Part no. 1643015
Connection A G 3/8 F
Nennweite DN 10
Länge 2600 mm
Typbezeichnung Typ VTK-3-RM
Entnahmetyp liegende Entnahme
Rückflussverhinderer mit Rückflussverhinderer
Messleitung mit Messleitung
Packaging standard packaging
Part no. 1643400
Spare parts Tank withdrawal fitting type VTK-3
Description
Packaging
Part no.
Description

Beipack UA 6/8/10 1-fach

Packaging standard packaging
Part no. 1522702

More products in the line of Withdrawal