Caramatic ConnectDrive

high pressure hose assembly with excess flow device for connection to all wall-mounted low pressure regulators with inlet M20 x 1.5 M, in particular for gas supply while driving and to the gas cylinder valve

Article name

high pressure hose assembly with excess flow device for connection to all wall-mounted low pressure regulators with inlet M20 x 1.5 M, in particular for gas supply while driving and to the gas cylinder valve

Open all Close all Advantages and equipment
  • can be used all over Europe through the use of high pressure hose assemblies with country-specific connections
  • excess flow device prevents gas escape in case of damage or if the hose assembly becomes detached, and blocks the gas flow, as soon as the nominal flow rate is exceeded by 10%
  • manual excess flow valve SBS/MA:
    no delay or leakage volume, but manual opening required
Conformity
  • single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate
Technical data
  • hose: rubber with textile lining
  • cold resistant up to -30 °C
Note
  • The 750 mm long hose assembly may only be used for cylinder brackets with a pull-out device.
Filter
Open all Close all
Caramatic ConnectDrive PS 20 bar
hose dimensions 6.6 x 4.0 mm
connections: cylinder connection x regulator connection
Connection A
Connection B
Length
Country of destination
Material
Hose dimensions
Packaging
Part no.
Connection A G.2 (Shell-F)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland FR
Werkstoff Rubber
Schlauchabmessung 6.6 x 4.0 mm
Packaging shop packaging
Part no. 7188402
Connection A G.2 (Shell-F)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland FR
Werkstoff Rubber
Schlauchabmessung 6.6 x 4.0 mm
Packaging shop packaging
Part no. 7188702
Caramatic ConnectDrive PS 30 bar
hose dimensions 6.3 x 5.0 mm
connections: cylinder connection x regulator connection
Connection A
Connection B
Length
Country of destination
Material
Hose dimensions
Packaging
Part no.
Connection A G.12 (KLF)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland DE / AT / PL
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188412
Connection A G.12 (KLF)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland DE / AT / PL
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188712
Connection A G.7 (Brit.POL)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland GB propane
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188407
Connection A G.7 (Brit.POL)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland GB propane
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188707
Connection A G.8 (EU-Shell)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland GB butane
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188408
Connection A G.8 (EU-Shell)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland GB butane
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188708
Connection A G.1 (Ital.A)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland IT / GR / CY
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188401
Connection A G.1 (Ital.A)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland IT / GR / CY
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188701
Connection A G.10 (POL-WS)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland SE
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188410
Connection A G.10 (POL-WS)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland SE
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188710
Connection A G.2 (Shell-F)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland CH / BE
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188403
Connection A G.2 (Shell-F)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland CH / BE
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188703
Connection A X.3 (Komb.Shell-H)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland NL / RU
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188423
Connection A X.3 (Komb.Shell-H)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland NL / RU
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188723
Connection A X.7 (Shell)
Connection B M20 x 1.5 nut
Länge 450 mm
Bestimmungsland SI / CZ / HR / SK / RS
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188427
Connection A X.7 (Shell)
Connection B M20 x 1.5 nut
Länge 750 mm
Bestimmungsland SI / CZ / HR / SK / RS
Werkstoff Rubber
Schlauchabmessung 6.3 x 5.0 mm
Packaging shop packaging
Part no. 7188727
Spare parts Caramatic ConnectDrive
Description
Packaging
Part no.
Description

Gasket for EU-Shell / Shell-F, material: NBR

Packaging standard packaging
Part no. 2000981
Description

Gasket for Ital.A, material: NBR

Packaging standard packaging
Part no. 2001105
Description

Gasket for M20 x 1.5 nut, material: FKM

Packaging standard packaging
Part no. 0459025
Description

Gasket for POL-WF / POL-WS, material: NBR

Packaging standard packaging
Part no. 0251337
Description

Gasket for KLF, material: NBR / cont. 5 units

Packaging shop packaging
Part no. 8001600
Description

Gasket for EU-Shell / Shell-F, material: NBR / cont. 5 units

Packaging shop packaging
Part no. 8000900

More products in the line of Pressure regulator for wall assembly